Builders Cleaning for New Homes and Models
Builders cleaning at Final Phase is built around the closing calendar. We clean new homes in phases, from drywall dust to the final shine, so each house is ready on the day a buyer or sales team needs it. Production builders, small custom builders and model complexes all work from the same three-clean sequence.
| Works with | Builders and sales teams |
|---|---|
| Homes | Production, custom, models |
| Key date | Closing and buyer walk |
| Phases | Rough, final, touch-up |
Cleaning that follows the closing calendar
A home builder does not get one deadline. Each house has its own closing date, and a subdivision can have a dozen homes at different stages at once. We plan crews by house, not by calendar week, so a home finishing paint on Monday is not cleaned until its flooring and fixtures are in.
Builders clean work also depends on who is still inside. Cabinet installers, trim carpenters and flooring crews finish at different times, and the cleaning crew should be the last people through the door, not the first. We ask for a release from your superintendent before the final clean starts.
We ask builders for a list of lots with their stage and target closing. We confirm access, whether the water and power are on, and any lockbox or gate details before the crew goes in.
If you also work with a general contractor or a framing superintendent on larger phases, we coordinate through them. Our page for general contractors covers that handoff in more detail.
What a builders clean looks like in each phase
Rough clean after drywall
After drywall and paint prep. Subfloors, garage, closets and window wells are swept and vacuumed of sanding dust and scrap. See rough construction cleaning.
Final clean after finishes
After cabinets, counters, flooring and fixtures. Kitchens, baths, glass and floors are cleaned room by room. See new construction cleaning.
Touch-up before the buyer walk
After the builder's own punch list and before the buyer walk. We reset fingerprints, dust and scuffs from the last repairs. See touch-up cleaning.
From dust and tape to a finished kitchen
Kitchens and primary baths are where buyers look first. We scrape paint and caulk from glass, remove protective film from appliances and cabinet hardware, wipe inside drawers and cabinets, and clean the floor last so nothing is tracked back across it.
The same sequence runs through the rest of the house: top to bottom, then floors, so dust falls onto surfaces that have not been cleaned yet.
Interior glass gets particular attention in new homes. Window stickers, manufacturer labels, stucco dust on sills and paint specks all come off before the buyer sees the view; see construction window cleaning for how that works.
- Appliance film, stickers and labels removed
- Sliders, tracks and window sills detailed
- Garage floor swept and entry areas cleared
Tell us the square footage, the phase and your deadline. We send a clear written bid, usually after a quick walkthrough.
Model homes and sales centers
Models are cleaned to a different standard than a house headed to closing.
Before the grand opening
A full final clean plus detailing of staged rooms, glass and entry floors.
Learn moreBetween phases of sales
A reset clean when a model is restaged or a new plan is opened, with floors, glass and baths brought back to showing condition.
Sales office
Lobby, restrooms and desk areas cleaned on a schedule your sales team picks.
Ready for the buyer walkthrough
The items buyers and inspectors tend to notice first.
Entry and living areas
- Front door glass and threshold wiped
- Baseboards and window sills cleaned
- Floors vacuumed or mopped last
Bathrooms
- Tubs, showers and glass free of film and labels
- Mirrors and vanity tops polished
- Drain covers and fixtures wiped
Builders clean extras
- Closet shelving and rods wiped
- Light fixtures and ceiling fans dusted
- HVAC registers and return grilles cleaned
Garage and exterior entries
- Garage floor swept
- Entry mats and door tracks cleared
- Meter and utility closets left tidy
Which clean fits which house
The mix of phases changes with the type of home.
| House type | Typical phases | Timing note |
|---|---|---|
| Production home headed to closing | Rough, final and touch-up | Touch-up lands right before the buyer walk |
| Model home | Final clean plus staged-room detailing | Timed to the grand opening, then refreshed as needed |
| Custom home | Rough and final, with a long gap between | Final clean waits for finishes and landscaping to settle |
Home Builders questions
What is a builders clean?
A builders clean is the cleaning done at the end of construction so a home can be shown, inspected or closed on. It usually includes dust and debris removal, glass, fixtures, cabinets and floors. We offer it in three phases.
How many cleans does a new home need?
Most homes get a rough clean, a final clean and a touch-up clean before the buyer walk. Some builders skip the rough clean on smaller or lower-dust jobs.
Can you clean many homes in the same community on one schedule?
Yes. We plan crews by lot and stage, and we adjust as closing dates move. Send us the lot list and we build the plan from there.
Do you handle landscaping or exterior pressure work?
No. Landscaping, exterior washing and driveway work stay with your site vendors, and our crews clean the finished interior and ground-level glass.
Do you bring your own supplies?
Yes. Our crews carry all supplies and equipment, so the house needs working power and, ideally, running water.
Can you re-clean a home that sat vacant after the final clean?
Yes. Homes that wait weeks for a buyer collect desert dust fast, so many builders book a touch-up clean closer to the closing date. Tell us the new date and we reset the house to showing condition.